Peugeot 208 Key Replacement: 11 Things You're Forgetting To Do
Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped working it could be due to an inoperative battery for the coin-cell or water damage, receiver modules issues, or even a defective chip. These are all easy solutions and you'll be able to get your car back up to speed in no time!
Car keys can also become faulty due to the blade getting worn. You can fix this problem by visiting your local Car Key Man Auto Locksmith to install a new blade.
Battery
The battery for the key fob in your Peugeot 308 can sometimes die or become weak enough to send an energizing signal to the car. This could cause the key fob to cease working and prevent you from locking or opening the doors or starting your engine. You'll need a new battery for your key fob to repair this.
You can purchase a new battery at an auto parts store, or at your local hardware store. Make sure that the battery is brand new and has not sat on the counter for too long. A brand new battery will have more capacity and can send a more powerful signal to the car.
After replacing the battery, try unlocking and locking the doors of your Peugeot with the key fob. If the doors don't unlock, the problem is likely in the car's receiver module that can be reset by your local Peugeot dealer.
The chip inside the key fob can also be damaged. You could cause damage to your key fob if you drop it on the ground, or expose it to water. The rubber seals that protect your chip from moisture can wear out over time. This is particularly true if you expose your key fob to water over long periods of time, such as swimming it in the ocean. To prevent this from happening, you should keep your key fob free of moisture and away from water.
Water Damage
If your key fob gets soaked regardless of whether you dropped it into the pool or threw it into a puddle, don't think it's a case of lost cause. While the key fob comes with rubber seals that protect it from water, prolonged exposure to water can cause damage to the electronic chip. Water is a great conductor and any water that is absorbed into the key fob will cause an array of short circuits that eventually destroy the electronic chip. After removing the batteries clean its contacts with isopropyl and then dry them completely before putting them back in.
Your Peugeot 308 may not start because of an unresponsive battery. Jumper cables are an excellent method to start the engine in case you have an extra car. If the battery is the problem then it must be replaced.
A poor receiver in the car can also prevent it from receiving the signal from the keyfob. The key fob may be damaged, or there could be a problem with the antenna, wiring, or the key fob itself. If you are using a new key fob, it may require to be programmed for the vehicle. If you cannot fix the issue on your own, contact a professional technician. A skilled technician will be able to determine the issue quickly and correct it swiftly.
Radio Interference
Signs like key fob not being recognized or having a restricted range of operation usually mean there is a problem in the system. It could be radiated or conducted, with the former being caused by power supply cables and the speaker wiring being too close to electrical components. In general, rerouting cables or moving them away from these components will fix the issue.
It's unlikely someone is listening to your key fob signal in an attempt to steal your vehicle, but it's possible that radio interference has ruined the signal. This is a simple issue to resolve.
If you're experiencing a problem with your key fobs that aren't being recognized, try a new battery. Make sure replacement peugeot key is of the correct size and type. If the battery is not properly sized, it could damage the fob.
These devices can interfere with the key signal, if they utilize the same radio frequency. Do not connect these devices to your key fob.
Pairing Issues
A car's remote keyless entry system contains a receiver that receives radio frequency signals from the key fob. You will not be able start your vehicle if this receiver is not functioning properly even if the key fob is working and is reprogrammable. This issue can be caused by a variety of ways, including by the battery of the coin-cell being dead or water damage. The receiver may also be malfunctioning due to an error in the software or internal damage to the key itself.
The battery for your coin in your Peugeot 308 keyfob has probably failed. It is easy to replace it with a brand new battery but it is important to choose the right battery for your key fob. It is best to use batteries that are the same size as well as voltage and specifications as the original.
Another reason why the reason why your Peugeot 308 key fob might not be working is due to the fact that it is linked to another vehicle. It is possible that you have accidentally given the key fob to a friend or the key was used to unlock other vehicles. This can be fixed by reprogramming your key fob using an OBDII scan. This tool will request details about your car for example, its VIN or engine type. It is vital to enter the correct details.